The large-inclination swing probability vibrating screen is a specialized screening equipment, this structure is based on the compact square swing screen with a larger inclination angle, which makes the material discharge faster and is suitable for materials that are easy to screen, have larger particle sizes, and have higher output. It will be a replacement for the traditional probability screen.
- Model: FYBS-1536 , FYBS-2040
- Material: Carbon Steel
- Mesh Size: 2-100 mesh
- Layers: 1-5 layers
- Capacity: 5-100 Tons/hour
- Customized: Acceptable
Price: $12500.0 – 21200.0 / Set
Working Principle
The swing probability vibrating screen works like a square gyratory screen, using the probability screening principle with multi-layer screens (3-6 layers), a large inclination angle (30°-60°), and large mesh sizes.
The swing probability vibrating screen operates by shaking the screen box back and forth, causing material to move in a gyratory motion. Smaller particles fall through the screen holes to the lower layer, while larger particles are discharged, completing the screening.
Structures
- Screen box: The main part of the swing probability vibrating screen, with built-in vibrator and screen, to achieve material screening through vibration.
- Vibrator: The power source, usually installed inside or near the screen box. Drive the screen box to swing, driving the screen to screen the material.
- Screen: Located inside the screen box, screens the material according to the particle size. The mesh size of the screen (i.e. the size of the screen hole) can be selected according to different screening requirements.
- Support spring: Located between the screen box and the base, it is used to support the screen box and reduce vibration transmission and noise.
- Drive device: Electric or hydraulic, produces a swinging motion to make the screen shake up and down.
Details
Specifications
| Model | Screen size | Screening area | Screen inclination | Layers | Power | Number of turns | Case travel |
|---|---|---|---|---|---|---|---|
| FYBS1536 | 1.5*3.5 m | 4.5-9 m2 | 5-8 | 1-10 | 5.5 | 180-260 | 25-60 mm |
| FYBS2040 | 2.0*4.0 m | 8-9 m2 | 5-8 | 1-10 | 7.5 | 180-260 | 25-60 mm |
Swing Probability Vibrating Screen Features
Multi-stage screening
Multi-stage classification of machine-made sand or natural sand, the screening mesh size: 5mm~2.36mm~1.2mm~0.6mm, some special mortars have been screened to 0.3mm~0.15mm~0.075mm.
High cost performance
absorbing advanced technologies at home and abroad, continuous research and development and on-site verification, successfully replacing expensive imported equipment in the production line of dry mortar.
Large output
The output of the probability screen can reach more than 100 tons per hour, and a single unit can complete the production capacity of multiple ordinary vibrating screens.
custom Design on demand
It can be designed as five-layer and multi-stage classification, fast net change, the rear end and front discharge port of the equipment are all detachable designs, and each layer of the screen can be quickly replaced.
Energy saving and environmental protection
Fully enclosed structure, the upper cover of the probability screen equipment is designed with a dust removal device, which can be easily connected to the on-site dust removal equipment to meet the requirements of dust-free screening.
Large electrostatic spray molding process
Large electrostatic spray molding process, the equipment is more beautiful, wear-resistant, and rust-proof.
Application
- Building materials industry: dry mortar, machine-made sand, natural sand, quartz sand, perlite, dolomite, calcite, feldspar and other stone powders and mineral powders.
- Food industry: grading of granular sugar, raw salt and edible salt.
- Other industries: sieve granular materials with a pore size of 0.5~10mm, and the loose density of the material is better than 0.8.
Dry mortar- Dolomite
Perlite
Silica Sand
Quartz sand
Mineral powder
Calcium carbonate
Crude salt
